www.tek-trol.com
11
Choose gasket according to the properties of the process medium and the temperature range.
Pay attention to the bolt balance lock.
3.2.2.3
Clamp Connection
Choose gaskets that meet specified standards to avoid excessive clamp locking and
squeezing gasket. Excessive locking of clamp may damage the sensing diaphragm and
cause measuring error.
NOTE
Engage process connection with a minimum of 7 thread connections and tighten
the housing rotation set screw to prevent it from rotating.
3.2.3
Housing Rotation
To ensure the visibility of LCD display
•
Loosen the housing screw.
•
Rotate housing to the desired angle up to 360
o.
•
Re-tighten the housing screw.
3.2.4
Terminal Side of Transmitter
Mount the transmitter in such a way that the terminal side is easily accessible to the operator.
3.2.5
LCD Display
Display module is used in field adjustment for parameter se
tti
ngs and site configura
tion before
starting the measurement process. The local 5-digit LCD displays important parameters, which can
be directly monitored at
the measuring point. It enables the operator to configure the device using
the function matrix. Display can be rotated 355°.
