Parts List:
Description
Qty
Washer, Flat, ¼”
Thick
x 2 ½”
4
Bolt, Hex, 5/8” x 3”, Gr. 8, YD
4
Nut, Flange
, 5/8”, Gr. 8, YD
4
Front Bracket
1
Rear Brackets (Two Isolators pre-installed)
L&R
Electrical Option Parts List:
Description
Qty
Wire Loop, 1/4"
2
Installation Instructions:
1. Remove two-post ROPS from machine, if equipped. Save fasteners to re-use later.
2. Take the left rear mounting bracket and position it where the left 2-post was mounted onto chassis.
The notch points forward and is at the top on the bracket.
June 2021© Toro Groundsmaster 4500-D Series ROPS Installation Manual
