April 2017 ©
Toro Groundsmaster 4100-D FT4 ROPS Operator Manual
Operating Instructions
Important
The following section locates, identifies and briefly describes the functions of all ROPS controls.
All operators should familiarize themselves with control location and function prior to operating
the mower. Failure to do so may result in unsafe operation of the mower and possible injury or
death to operators and bystanders.
The switch plate is located beside the upper A-A cross member near the ROPS roof. The
following switches are available and their functionality is described.
1.
Front Work Lights Rocker Switch (optional)
Low position: Off
High position: On
2.
Rear Work Light (s) Rocker Switch (optional)
Low position: Off
High position: On
3.
4 - way Flashers Rocker Switch (optional)
Low position: Off
High position: On
4.
Turn Signal Rocker Switch (optional)
Left position: Left
Centre position: Off
Right position: Right
5.
Front Wiper Rocker Switch (optional)
Low position: Low speed
Center position: Off
High position: High speed
6.
Head Lights Rocker Switch (optional)
Low position: Off
High position: On
7.
Beacon Rocker Switch (optional)
Low position: Off
High position: On
