. Remove both seat belt brackets from the 2-post ROPS.
. Take the left side bracket, and using the factory hardware, attach to the left tab beside the
rear mount plate.
. Take the right side bracket, and using the factory hardware, attach to the right tab beside the
rear mount plate.
. Use the provided fir tree fasteners to retain the flat 3" weather seal into place on the side of
the tractor. Drill a small 1/4" pilot hole through rubber and into tractor sheet-metal in order to
install the fasteners.
. Un-bolt and remove the SMV sign from the 2-post ROPS.
. Position the SMV sign mount against the left rear tractor fender and mark the location of the
two holes that are in the SMV sign bracket. Line the sign up with the bottom of the fender as
shown.
June 2021© Massey GC1725M ROPS Cab Installation Manual
