BEFORE YOU START
Ensure
the device is comissisioned on your network server before activation
For assistance please visit
http://www.support.tektelic.com
Activating the Device
The device is shipped with the batteries installed and in a state of DEEP-SLEEP until activated with a magnet.
There is no need to open the enclosure to activate the device.
To activate the device, move the provided magnet close to the magnet symbol at the bottom of the enclosure
using a specific switch pattern:
Magnetic Pattern to Activate or Reset Device
Step 1
: Bring Magnet within 2cm of
M
agnet
S
ymbol
on
device (see picture) for more than 3 seconds but less than 10
seconds.
Step 2
: Remove Magnet away from Device. LED will blink
until device has joined Network Server.
Note:
•
This magnetic pattern always triggers a module reset, even during normal operation.
•
LED will blink for every message sent to Network Server.
Magnet Symbol
LED
