Kona Macro User Guide
T0004279_UG
Version 1.1
TEKTELIC Communications Inc.
Confidential
Page 10 of 34
Port
contact DC power
approved mating connector (p/n
23002211-02, or equivalent)
Hybrid Direct DC
Power/Fiber Ethernet
Port
0 or 1 Harting Hybrid DC Power
/ Optical connector
Harting Technology Group approved
mating connector
GPS Port
1
N-Type female
Industry standard N-Type male
Earth Ground
1
Chassis Protective Earth
Ground terminal
Industry standard 2-hole lug, 1/4 x 0.75”
spacing
1.3
Specifications
The Kona Macro Gateway specifications are listed in Table 3.
Table 3: Kona Macro Gateway Specifications
Attribute
Specification
Dimensions
222.2mm (8.7”) wide x 101mm (4.0”) deep x 287.3mm (11.3”) tall
Weight
5.1 kg (11.3 lbs)
Operating Temperature
-40°C to 60°C (-40°F to 140°F) at sea level Including solar loading.
Relative Humidity
10% to 100%
Operating Altitude
-60 m to 4,000 m (-197 ft to 13,123 ft)
Power Input, Direct DC
48 VDC nominal, 37 to 57 VDC operating range after 42 V maximum start-up
threshold. Positive or negative ground referenced feed. SELV source
required. Maximum 10A input overcurrent protection.
Power Input, PoE
802.3 at Type 2 Class 4, Mode A or Mode B standard but constrained to 3m
maximum cable length and 56V minimum PSE output voltage.
Four pair powering is supported and preferred, and is required to otherwise
meet the full 802.3 at Type 2 Class 4 operating specifications for cable
length.
Power Consumption
35 W maximum, 1.0 A maximum with direct DC powering
34 W maximum, 0.6 A maximum with PoE
Weather Tightness
UL Type 6 (IP-67)
Regulatory Compliance
CSA/UL 60950-1 & CSA/UL 60950-22
FCC Pt. 15 Class B
Surge Protection
All interfaces are protected to primary levels except for the 3G/4G modem
antenna port which supports local antenna mounting only or requires
external surge suppressor.
