2-8 Choose the objective
Turn the nosepiece to choose the objective. The objective
selected should be set vertically right to the slide. Generally,
first use the
2.Operation N2
SERIES
objective 4X to focus to reveal general structural image.
Then use the higher power objective to reveal smaller
details.
When using the oil objective 100XR, a little of immersion
oil must be put between the objective and the cover glass.
2-9 Change the lamp or put on the mirror
Before changing the lamp, first pull the plug out off the
electrical socket and wait for a while until the lamp cools
down to avoid being burnt. Loosen the door-screw on the
bottom to open the small door. Then you can see the lamp
and lamp holder. Pull the lamp out and insert a new one into
the holder. Close the door by tightening the screw.
While changing the mirror, screw off the base-lens or mirror
and screw on a new mirror.