Connection type
- Following establishing Tsm connection, convey (IP) XXX.XXX.XXX.XXX info on device
display to relevant staff.
- Use voice Sim Card on Device. Do not use Data Sim Card
-Insert Sim Card before power up device.(Make sure Sim Password disabled and
data-Internet services active)
- Make antenna connection of the device.
- Power up device with 12 VDC as instructed
- Power LED light will turn on.
- Signal LED's will light to indicate signal reception strength.
- TX2 and RX2 LED's blinks, this indicates clear communication between modem and
processor
- Consult service center if RX2 LED's on but TX2 LED off.
- Network LED indicates device connection to Internet (during active connection)
- SRV LED's indicates server connection to device
- TX1,RX1,ACK LED's indicates communication between device and M-Bus
(during server connection)
Antenna
Input
Info Led
+ -
12VDC
GND TX
RX
