Tekron PTP TRANSLATOR User Manual Download Page 6 | Manualshive

Page: 6 / 13

Tekron PTP TRANSLATOR User Manual Download Page 6

PTP Translator Manual / December 2014

6

The connections from left to right along the bottom are optional output (OPT) ‘+’ and ‘-’; Alarm (ALM) ‘+’ and ‘-’; TTL

‘+’ and ‘-’; Ground; Power Supply Negative; Power Supply Positive. If the optional output isn’t fitted, then the unused
terminals are covered.

Note: The Power supply has polarity protection built in to prevent damage.

The label on the side of PTP Translator indicates the type of IO card: Do not apply voltages to output
only cards and ensure that switch cards are connected appropriately!

7

Product Configuration

Any configuration changes will need to be done via the Windows based Configuration Tool. The Configuration Tool is
compatible with and version of Windows after Windows XP Service Pack 3, including Windows 7, 8 and 8.1. The latest

version of the tool is available from the Tekron web site www.tekron.com/ptp-translator under the “Resources” tab.

Figure 4 - PTP Translator Bottom Connectors

Figure 3 - PTP Translator Top Connectors

«
...
4
5
6
7
8
...
»

Summary of Contents for PTP TRANSLATOR














Reviews:

No comments