MAINBOARD BIOS SETUP
MAINBOARD BIOS SETUP
P6L40-
P6L40-A
A4
4E
E User’s Manual
User’s Manual
34
34
PCI accomplishes these goals with its 32-bit Data path Local Bus design, and support for
Plug & Play. Unlike older expansion bus architectures, PCI provides peripherals with a
direct connection to the CPU and memory. The PCI bus runs at 33Mhz and has a maximum
transfer capability of 132MBps. With Plug & Play, the system BIOS automatically
determines hardware resources for new peripherals, simplifying installation of multiple
interface cards.
This Setup Menu provides configuration options for the PCI Bus and its assigned resources.
PNP OS Installed
: No
Slot 1 Use IRQ No.
: Auto
Resources Controlled by
: Manual
Slot 2 Use IRQ No.
: Auto
Reset Configuration Data
: Enabled
Slot 3 Use IRQ No.
: Auto
Slot 4 Use IRQ No.
: Auto
IRQ-3 assigned to
: PCI/ISA PnP
IRQ-4 assigned to
: PCI/ISA PnP
SYMBIOS SCSI BIOS
: Auto
IRQ-5 assigned to
: PCI/ISA PnP
PCI Latency Timer
: 80 PCI Clocks
IRQ-7 assigned to
: PCI/ISA PnP
Assign IRQ For USB
: Enabled
IRQ- 9 assigned to
: PCI/ISA PnP
Used MEM base addr
: N/A
IRQ-10 assigned to
: PCI/ISA PnP
IRQ-11 assigned to
: PCI/ISA PnP
IRQ-12 assigned to
: PCI/ISA PnP
IRQ-14 assigned to
: PCI/ISA PnP
IRQ-15 assigned to
: PCI/ISA PnP
DMA-0 assigned to
: PCI/ISA PnP
DMA-1 assigned to
: PCI/ISA PnP
ESC : Quit
↑
↓
→
←
: Select Item
DMA-3 assigned to
: PCI/ISA PnP
F1 : Help PU/PD/+/- : Modify
DMA-5 assigned to
: PCI/ISA PnP
F5 : Old Values (Shift) F2 : Color
DMA-6 assigned to
: PCI/ISA PnP
F6 : Load BIOS Defaults
DMA-7 assigned to
: PCI/ISA PnP
F7 : Load Setup Defaults
PNP OS Installed
-
Set to Yes if your operating system supports Plug & Play, such as
Windows
95.
Resources Controlled By
-
The Award Plug and Play BIOS has the capacity to
automatically configure all of the boot and Plug and Play compatible devices. This
capability is specifically designed for a Plug and Play operating system such as Windows
95. Choices are
Auto
and
Manual
(default).
Reset Configuration Data
- Reset Configuration Data: When set to Enabled, ESCD
(Extended System Configuration Data) is cleared. This setting will automatically be set
back to Disabled when the system reboots.
Enabled
(default) and
Disabled
.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
-
By default, all resources are
assigned to the PCI Bus except IRQs 3, and 4. If an ISA card requires a particular IRQ or
DMA channel, those resources should be set to Legacy ISA so that the PCI Bus will not try
to use them. Choices are
Legacy ISA
and
PCI/ISA PnP
.
