BUILT-IN SYMBIOS SCSI BIOS
BUILT-IN SYMBIOS SCSI BIOS
P6F40-B5 User’s Manual
P6F40-B5 User’s Manual
40
40
•
Device Selections
: views and changes settings for the devices attached to the selected
adapter.
1. SYM53C860
Sync Data Disc Time Scan Scan Queue
Rate Width
Out
Bus
LUNS Tags
0 - Dev0 N/A
20
8
On
10
Yes
Yes
Enabled
1 - Dev1 N/A
20
8
On
10
Yes
Yes
Enabled
2 - Dev2 N/A
20
8
On
10
Yes
Yes
Enabled
3 - Dev3 N/A
20
8
On
10
Yes
Yes
Enabled
4 - Dev4 N/A
20
8
On
10
Yes
Yes
Enabled
5 - Dev5 N/A
20
8
On
10
Yes
Yes
Enabled
6 - Dev6 N/A
20
8
On
10
Yes
Yes
Enabled
7 - SYM53C860
20
8
On
10
Yes
Yes
Enabled
D -Device Selection 8-15
F1 .. Help.
ESC .. Exit this menu.
Device Selection 0-7
The above menu provides information about individual SCSI devices attached to the
selected host adapter, and the adapter itself. To make changes to these settings select a
device from this display and press <Enter> to bring up the individual
Device Setup
menu.
Device Setup Menu
When you select a specific device from the Device Selection menu, your computer displays
the following Device Setup menu. The settings in this menu effect individual SCSI devices
attached to the selected host adapter. Changes made from this menu do cause the system to
reboot upon exit from the SCSI Configuration utility.
Dev0 N/A Setup
1. SYM53C860
R - Sync Rate (Mega Bytes/sec) ..... 20 Mb/sec
W - Width (bits) .................................. 8
D - Disconnect ................................ On
T - Read Write I/O Timeout (secs) ... 10
S - Scan for Device at Boot Time ... Yes
L - Scan for SCSI LUNs ................. Yes
Q - Queue Tags .............................. Enabled
F1 .. Help.
F2 .. Restore Default Setup.
ESC .. Exit this menu.
Sync Rate (Mega Bytes/sec) -
Defines the maximum transfer rate the host adapter attempts
to negotiate. The host adapter and a SCSI device must agree to a rate they can both handle.
Width (bits) -
Sets the maximum data width the host adapter attempts to negotiate. The
host adapter and a SCSI device must agree to a width they can both handle. Only host
adapters that can do 16 bit data transfers have this option enabled.
Disconnect -
SCSI devices have the ability to disconnect from the bus during an I/O
transfer. This option tells the host adapter whether or not to allow a device to disconnect.
