INSTALLATION
Installation Guide
13
Keyboard Power-on Jumper (JP1)
This feature will power on the system from the keyboard. In addition to the jumper
setting, the “
Power On Function
” in the
Integrated Peripherals Setup
of the
BIOS must be set properly also.
Note:
If you choose to use a password to power on the system, it is recommended
to keep a written record of your password. If you forget the password, the CMOS
must be cleared by removing the mainboard’s battery AND disconnecting the
mainboard’s power supply for a couple of seconds then re-installing them back.
This is the only way you can power on your system again.
