INSTALLATION
INSTALLATION
P6B40D-A5 User’s Manual
P6B40D-A5 User’s Manual
11
11
Warning!
ü
ü
For a single CPU system:
You must insert the CPU into the
First
Slot 1 socket and the
T510 GTL+ Bus Terminator
into the second Slot 1 socket.
ü
ü
For a dual CPU system:
You must use only
Pentium II CPUs
for the dual CPU system.
Do not use two Celeron CPUs
. It is recommended that you use two identical CPUs in
your system. If you use CPUs with different speed requirements, you must set the CPU
Clock Selection Jumper Block to the lower frequency.
ü
ü
CPU cooling fan:
It is required to use a CPU Cooling Fan to prevent the CPU from
overheating. Install the fan first before inserting the CPU into the socket.
Installing Pentium
®
II or Celeron
®
CPU
1.
Slide the CPU down into the retention mechanism. Make sure the CPU is correctly
oriented. (Fig. 1)
2.
Seat the CPU firmly into the slot until the two tabs on the CPU click outwards to lock
the CPU in place. (Fig. 2)
Fig. 1
Fig. 2
