9. SCO UNIX DRIVERS
DC-395 Series User’s Manual
53
53
Enter source file name: OS5_395 ------> Enter
Enter destination drive: A: ------> Enter
Please insert a formatted diskette into drive A: and press -ENTER- :
Number of sectors per track for this disk is 18
Writing image to drive A:. Press ^C to avort.
Track: 79 Head: 1 Sector: 16
Done.
The SCO Unix/OpenServer driver diskette is now made.
Please refer to the following instruction for installation procedures._
1.
Insert the system diskette N1 and boot up.
2.
When the boot prompt is shown:
Boot :
Type the following command to proceed:
link
3.
What package do you need linked in the system, or a to quit?
Type the following package name to proceed:
t3x5
The system will keep booting from floppy N1, then request to have the driver diskette
inserted. Insert the SCO driver disk. After the driver is successfully loaded, follow the normal
procedures to install SCO Unix/OpenServer. During the installation process, the driver
diskette may need to be inserted again as instructed.
Once the system reboots with the driver successfully installed, messages similar to the
following will be displayed:
device
address
vector
dma comment
——————————————————————————————————
%DC3X5
-
-
-
Tekram PCI SCSI adapter driver(V3.00)
%+adapter
0x9000-0x9100
11
-
ha=0/id=7 at bus=0/dev=5/func=0
%++device
-
-
-
id=0/lun=0/disk/206MB/”IBM ...”
%++device
-
-
-
id=2/lun=0/tape/”WANGTEK ...”
