TP3005P
Protection
Using Overcurrent Protection
To protect against overcurrent, set up the maximum current and then press the
OCP
button.
Press
Off/On
to apply the output to the load.
If the output current becomes higher than the set value, the power supply cuts off the output
and the
OCP
indicator flashes.
Disconnect the load. To recover, press the
OCP
key.
10.
Remote Control via PC
To operate the power supply via the included pc software, proceed as follows:
1.
Install the software on your pc and launch the software.
2.
Connect the power supply to the pc via the USB
[17]
port and switch it on.
Note
: the keys on the front panel are locked when the power supply is connected to a pc. You can
only
operate the power supply via the pc. The LED display and indicators work normally.
3.
Click the shortcut icon to launch the software. The opening screen appears.
4.
Choose the connected interface number from the drop list and click ENTER to confirm.
6
