pic. C pic. D
4) Connect the SLC power cables and the SLC
data cables coming from Astra-A RPA and AL through
the holes for cable entering in the device base. Rec-
ommended cable type
– KPSNG (A) -FRLS 2 × 2 ×
0.5. Maximum length of the cable connected to AL
–
150m.
5) Fix the Astra-MA base on the selected surface.
6) Return the PCB to its place. (pic. e.)
e.
7) Connect the cables to the terminals according to the
table:
Terminal
Function
А, В
Input for connecting the Data line SLC
«+», «-
»
Input for connecting the power line SLC
Z1, Z2
Input for AL
8) Close the Astra-MA cover.
9) Perform an Astra-MA registration in RPA (see
section 6).
10) Perform an Astra-MA setup according to the Rec-
ommendations built into the PKM Astra Pro or Pconf-
Pro program. Astra-MA setting from the Astra-812 Pro"
is not
available.
11) Launch a test (section 8).
6 ADDING TO THE SYSTEM
Registration of Astra-MA in the RPA is carried out using
the “Astra-942" Laser Pointer (ASTRA-942) and sup-
plied separately.
1)
Connect the Extender RPA to the Control Panel via
RS-485 interface.
2)
Register the RPA in the Control Panel according to
the user guide of Astra-812 Pro or the manual built-in
the Configuration module of the PKM Astra Pro or
Pconf-Pro PC. (See www.teko.biz)
3)
Remove the Astra-MA cover by pushing the
сover
latch out of the groove in the base.
4)
Check the connection of cables to the terminals on
the Astra-MA PCB ("+", "-", A and B) from the RPA.
5)
Start Registration mode of devices in the Extender in
the Control Panel in accordance with the Instructions.
The mode takes 60 sec. to register one device.
6)
Start the registration mode on Astra-MA using Astra-
942. Illuminate the Astra-MA indicator from the ASTRA-
942 button for at least 1 sec. The Astra-MA indicator
should turn on for 2 sec.
WARNNING!
Running registration for several detectors at one
and the same time is forbidden.
7)
Registration running check:
In case of successful registration, you will see
“Astra-MA” in the setting module program in As-
tra Pro PKM or Pconf-Pro,
or “Astra-MA is regis-
tered” on the screen of the Astra-812 Pro.
In case of unsuccessful registration you will need
to repeat actions from 5) to 7).
7 REMOVING FROM THE SYSTEM
Removing Astra-MA from the RPA
’s memory can be
held via installation PKM program module Astra Pro,
Pconf-Pro or Astra-812 Pro menu.
8 TESTING
Run a testing mode with using the Astra-942:
-
Press the top Astra-
942 button
-
Irradiate the Astra-
MA indicator for a
second. Astra-MA
indicator will switch
on for 10 sec.
A test notification will be recorded in the event log of
Control Panel, Astra Pro PKM or Pconf-Pro.
9 WARRANTY
The operation warranty period is 5 years from the date
of operation start-up, but no longer than 5 years 6
months from the date of manufacturing subject to the
requirements of User guide.
