Astra-6131
Wireless glass break detector
User guide
Manufacturer:
ZAO NTC TEKO
Gafuri str. 71
420108 Kazan, Russia
+7(843) 528-03-69
[email protected]
www.teko.biz
Made in Russia
Rev. 6131-v3_3_instr_en
1 FUNCTION
The detector is designed to detect the destruc-
tion of glass, generate an alarm notification and
transmit a notification via a radio to the Security
Hub controller.
The detector supports measurement and
transmission over the radio (in radio mode 2) of
the residual capacity of the battery with display
in the event log when values of 30, 20, 10% are
reached.
The frequency of transmission of values is
equal to 12 sec. (Rtst jumper installed) or 60
sec. (Rtst jumper not installed).
The detector supports connection of the hard-
wired detectors with normally closed contacts.
The length of the wire is no more than 1.5 m.
2 DETECTION ZONES
Front view Side view
Main detection zone
Probable detection zone
(determined during testing see p. 9)
3 DELIVERY SET
Delivery set includes: dowels
- 2 pcs., screws - 2
pcs., jumpers
– 5 pcs. (installed), battery
(CR123
А, 3V installed) - 1 pcs., user guide – 1
copy., label
– 2 pcs.
4 SPECIFICATIONS
Acoustic channel operating frequencies:
- first (high), kHz .............................. from 4 to 6
- second (low), Hz ..................... from 100 to 200
Wireless coverage, m .................................. 100
Supply voltage, V ........................ from 2,6 to 3,2
Overall dimensions, mm .................
87 × 54 × 28
Operating conditions
Temperature range,
°
С
............ from - 20 to + 50
Relative air humidity, %
......... up to 98 at + 40
°
С
without moisture condensation
5 OPERATING MODES
Setting operating mode of the detector, as
well as LED indication of notifications are
provided within 10 minutes after battery
insertion!
Mode
Plug
Jumper
Mode 2* (compatible
with Security Hub)
Mode 1
Rmod
Test signal
transmission
period**
12 sec.
60 sec.*
Rtst
Frequency 1* (compati-
ble with Security Hub)
Frequency 3
Lit
Acoustic channel high
sensitivity
Acoustic channel nor-
mal sensitivity*
GB
Zone input on
Zone input off*
Ext
* Factory setting.
**Only for radio mode 2
