Astra-531 Ver.PIR
(Surface Lens)
Optic-Electronic PIR Motion
Detector
User Instruction
*
Sales:
Controlex GmbH
Philosophenweg 31-33
47051 Duisburg,Germany
+49 (0) 203/393 91 188
Warranty service and
technical support:
TEKO-TD
Prospekt Pobedy str. 19
420138 Kazan, Russia
+7(843) 261-55-75
Made in Russia
Rev. 531-ikv1_0_instr_EN
1 FUNCTION
Detector is intended to detect unauthorized
access into closed protected area, and to
generate an alarm notification by opening of
signaling relay contacts
.
2 DETECTION ZONE
3 SPECIFICATIONS
Range of detected
moving speed, m/s
................. from 0,3 up to 3,0
Power supply voltage, V ............. from 8 up to 15
Current consumption, mA, max ......................18
Overall dimensions, mm .....................
62×37×29
Operating Conditions
Temperature range,
°
С .............. от - 20 до + 50
Relative air humidity, % ........... up to 95 at + 35
°
С
Without moisture condensation
4 DELIVERY SET
Delivery set contains holders and fasteners
(bracket - 1pcs., dowel
– 2 pcs., screw – 2
pcs.), jumper
– 2 pcs.
5 OPERATING MODE
Operating mode
Plug
name
Jumper
position
High detectability
of PIR-channel
Normal
detectability
of PIR-channel
PIR
“Alarm memory”
ON
“Alarm memory”
OFF
Mem
TEST-pass
-
See par. 9
6 INSTALLATION LOCATION
1)
Recommended installation height is 5 m max.
2)
Installation
on ceiling, on a wall, in window
openings and between window frames is
al-
lowed
.
3)
Alarm loop and power supply wires should
be located far from power cables.
To eliminate false alarm hazards
It is recommended to close all doors, air-vents,
switch off fans, air-conditioners and other
sources of intense air flows in the room during
protection period.
Not recommended installation locations
