TEKO Broadcast SYNAPSE30, User Manual

Page: 16 / 34

SYNAPSE30 2G 30W FM Exciter User Manual
DIRECT KEYS FUNCTION AND ASOCIATED LEDS
RF ON Turns RF ON/OFF (Enable or Disable the RF output)
Led lights when RF is ON (enabled).
Attention: the led indicate indicate if the output power is enable or
disable.
If the RF is enable, It lights even if the output power is zero.
The ON AIR indicates if there is RF present on the output.
LOCAL Set the transmitter in LOCAL or REMOTE
Led lights when transmitter is on LOCAL mode.
RESET ALARM Reset the VSWR allarm. in case of VSWR too high the transmitter
acts the protection putting the output RF in OFF.
It tryes 10 times to restablisch the output power, if the VSWR is
always present the transmitter stops permanently. The red led lights.
The user can reset this allarm with this button.
UP & DOWN ARROWS Browser keys. Use these keys to navigate trough the menus and set
the values of the working parametere
ENTER Accept the value set with the arrows keys
ESC Escape without save of all the menus and come back to the main
menù