Teknoware TKT6716C, Installation And Maintenance Instructions Manual

Page: 7 / 56

VOT 2; Rev 1.2; EN; 09.07.2013
TKT67C
– Installation and maintenance
7

indicating the address of the faulty luminaire with the LED and the number of the circuit,
in the addressable monitoring of the luminaires (7 segment display and LED bar)

indicating the faulty luminaire circuit with the LEDs and the number of the circuit in the
circuit monitoring (7 segment display)

a short operation test time can be set to
take place after each 1…7 days

battery test eve
ry 6 months 4.1 and 4.7 at 0.00 o’ clock.

tests can also be started manually

reporting of the test results on a printer, in the TKT67xxCD(L) models or optional
integrated printer TST6731 (= log book)

LCD display (optional)

in the report, the test date, possible faulty luminaires, duration of the test and the
condition of the battery can be seen

interface options for central monitoring
The central battery unit does not require any other regular user action after its installation and
commissioning than checking the status of the signal LEDs (the left-hand side bar) at specified
intervals.
No separate data transfer cables are needed for the luminaires as the data is transferred via the power
supply cables.
A self-learning system; luminaires can be added or removed afterwards.
The central battery unit can be set for either addressable monitoring of the luminaires or for circuit
monitoring. In the addressable monitoring of the luminaires, the luminaires must be equipped with an
address module from Teknoware. All the Teknoware luminaires the type code of which ends in letter
K
are fitted with this feature.
The batteries Pb (18 pcs) or NiCd (180 pcs) for the central battery unit always require a separate
battery container and battery cables.
All the functions related to the use of the central battery unit can be performed using its control panel
that also includes display LEDs to indicate the status of the unit. The panel functions are described in
Chapter 4.6 Operation of the central battery unit .
3.7 Technical specifications
Mains connection: N/PE 220-240 V AC 50/60 Hz 3~
Casing: IP21
Output voltage: mains connection: 220-240 VAC, battery operation: 216VDC
Battery voltage: 216 VDC
Battery charging time: 12 h 80 %
Max. batteries: 18 x 65 Ah
Max Input power
TKT6716C(N): 8,600 VA
Max Input power
TKT6724C(N): 11,400 VA
Max Input power
TKT6732C(N): 14,200 VA
Max Input power
TKT6740C(N): 17,200 VA
Max Input power
TKT6748C(N): 20,000VA
Max Input power
TKT6756C(N):
22,800 VA
Ambient temperature range:
+10
…+50

C
Input fuse: 3-phase 16 A C-curve