Teknoware TAPSA CONTROL TKT65, Installation And Maintenance Instructions Manual

Page: 26 / 53

VOT 34; Rev 1.81; EN; 11.12.2019
TKT65C
– Installation and maintenance
26
Turning the power ON for the first time
Before turning the power ON, make sure that the system is set up correctly, and the battery capacity is set as
described in the previous chapter.
1. Turn the S1 main switch and distribution fuse F1 to '0' position.
2. Connect the battery fuses F2 and F3.
3. Turn the mains fuse F1 to '1' position.
4. Close the central battery unit cover.
5. Turn the mains switch S1 to '1' position.
Note!
Always connect the battery fuses before turning the distribution fuse F1 to position '1'!
Forced charging of the batteries
Forced charge button for batteries
WARNING
Using forced charging button is live working and it must be done in accordance with live working
declarations
.