loss of picture during operation, or if you notice a strange smell or there is smoke,
immediately switch the unit off, disconnect the mains cord and contact the
manufacturer’s
technical support department.
Installation / Storage
2.
•
This unit contains high precision pieces of electronics. To ensure optimal
performance
and avoid damage, do not store it in any location where it may collect dirt, duct, lint,
etc.
Do not expose it to extreme heat or cold (e.g. in direct sunlight, near a heater or in
the car
during the day). Place the unit in a secure place to avoid falls.
•
Before moving the unit, always unplug all cords first.
•
When installing the unit, make sure that an outlet is within easy reach. In case of
malfunction, switch the unit off and unplug the power cord. When the unit is not in
use
for a long period of time, make sure that the mains cord is disconnected.
Connectivity
•
Before connecting the unit to other electronic devices, always switch off and
unplug all
devices.
Maintenance
•
Do not spill liquids on the unit. Do not use any diluents or volatile liquid to clean
the
unit. Instead, use a soft slightly damp cloth and allow the unit to dry completely
before
using again.
Handling
•
Do not poke your finger into the openings on your unit.
•
Never put paper, metal parts or other objects into the openings of your unit. If you
suspect that there are foreign parts in your unit, switch it off and unplug the mains
cord.
Contact the manufacturer’s technical support department.
•
Do not step on or place heavy objects on top of the unit. To avoid hardware
damage,
handle all buttons, connectors and switches gently.
