Tekno EB410.2, Building Instructions

Page: 20 / 32

TKR1323
M3x10mm Flat Head Screw
x6
TKR1221
M3X8mm Washer
x4
TKR1522
M3x8mm Cap Head Screw
x2
TKR1403
M3x10mm Button Head Screw
x4
TKR1403
TKR1323
TKR1323
TKR1403
TKR1221
TKR6586
TKR6685
TKR1221
TKR6586
TKR6539
TKR1522
Motor (not included)
Step
M-1
Step
M-2
Step
M-3
Thread
Lock
IMPORTANT RADIO SETUP TIPS, MUST READ:
The Tekno RC EB410.2 is highly tunable, but can be very
aggressive depending on track conditions and tires used.
To help with this, we recommend that you are well informed
about setting up your Steering EPA, Servo Speed, Dual Rate,
and Exponential Curves.
PLEASE READ PAGE 28 FOR MORE DETAILS.
Steering servo (not included)
TKR6586
TKR6586
TKR1403
Note: We recommend using
a low profile servo with at least
180 oz/in torque and metal
gears. Running less than our
recommended rating will
increase the chance of
premature servo failure.
Note: This shim only
required if the servo
is hitting chassis,
or if the servo
arm is hitting
the ackerman.
Note: This shim only required if
the servo is hitting chassis,
or if the servo arm is hitting
the ackerman.
TKR1221
(w/2 cell)
(50-80 ft Straight)
Small Track
(48pitch pinion/spur)
Large Track
(48pitch pinion/spur)
(80-150 ft Straight)
Motor
5.5T
6.5T
7.5T
8.5T
10.5T 18/81 tooth
19/81 tooth
20/81 tooth
21/81 tooth
22/81 tooth 19/81 tooth
20/81 tooth
21/81 tooth
22/81 tooth
23/81 tooth
13.5T 22/81 tooth 24/81 tooth
(50-80 ft Straight)
Small Track
(32pitch pinion/spur)
Large Track
(32pitch pinion/spur)
(80-150 ft Straight)
12/53 tooth
12-13/53 tooth
13-14/53 tooth
14/53 tooth
14-15/53 tooth
12-13/81 tooth
13/53 tooth
13-14/53 tooth
14-15/53 tooth
15/53 tooth
14-15/53 tooth 15/53 tooth
Bag M
Final Assembly
20