Tekno EB 410, Building Instructions

Page: 20 / 32

TKR1321
M3x6mm Flat Head Screw
x2
TKR1323
M3x10mm Flat Head Screw
x6
TKR1221
M3X8mm Washer
x6
TKR1522
M3x8mm Cap Head Screw
x2
TKR1403
M3x10mm Button Head Screw
x2
TKR1409
M3x20mm Button Head Screw
x2
TKR1523
M3x10mm Cap Head Screw
x2
TKR1409
Steering servo (not included)
For Low Profile servo
installation, see page 24.
For Low Profile servo
installation, see page 24.
TKR1323
TKR1323
TKR1409
TKR1221
TKR6586
TKR6685
TKR1523
TKR1221
TKR1523
TKR1221
TKR1221
TKR1321
TKR6586
TKR6586
TKR6539
TKR1522
TKR1403
Screws
Note: Refer to page 27
for a recommended pinion
chart to best suit your motor.
Note: MESH SHOULD BE AS TIGHT
AS POSSIBLE WITHOUT BINDING.
Motor (not included)
Fan (not included)
(not included)
Pinion/Set screw
(not included)
25mm and 30mm
fans compatible.
Mount ESC, receiver & transponder
during this step. (not included)
Step
L-1
Step
L-3
Step
L-4
Step
L-5
Step
L-2
TKR1221
Thread
Lock
Thread
Lock
Thread
Lock
Thread
Lock
Note: We recommend using a low
profile servo with at least 150 oz/in
torque and metal gears. Running less than
our recommended rating will increase
the chance of premature servo failure.
Bag L
Final Assembly
20