Tekno RC EB48.3, Building Instructions

Page: 19 / 28

TKR6033
TKR6140
TKR6007
TKR5027
Note: Slot in spring
perch should face
outside of vehicle.
TKR1202
TKR1605
TKR6015
TKR6008
TKR6009
TKR6060
M2.5 Lock Nut Zinc
TKR1200
x2
TKR1211
M3 Lock Nut Flange Black
x2
*TKR6041
*TKR6042
*TKR6043
*TKR6030
*TKR6031
*TKR6032
*TKR6034
*TKR6055
*TKR6056
(Option)
TKR6061
TKR5049A
*TKR6061T
(Option)
Note:
Shaft guide
orientation
Note: Rear shocks use
longer shock bodies - TKR6060,
longer shock shafts - TKR6061,
longer springs - TKR6033
and longer shock boots - TKR6145
Note: Use green
slime or oil on
shock shaft
threads AND
O-rings to
prevent tearing
and leaking.
Step
N-1
Step
N-2
Step
N-3
TKR6140
TKR6145
Note: Shock boots
must be installed
before attaching
rod end.
TKR1202
M4 Lock Nut Black
x2
TKR1211
Note: Tighten
TKR1211 lock
nut all the way
down, then back
off 1/4 turn.
Use thread lock!
Thread
Lock
TKR6003
TKR6009
TKR6013
*TKR6018
*TKR6003B
(Option)
Fill oil level just
below the top of
the shock body.
Use #450wt Oil
Rear
Note: Apply a small
drop of oil for
easy installation.
TKR1240
Note: Black screw is CW threaded and goes on passenger side.
Silver screw is CCW and goes on driver side.
TKR1240
M3x18mm Shock Mnt Screw
x2
450
TKR1200
TKR6159 (conical)
(tapered)
*TKR6155
*TKR6156
*TKR6157
*TKR6158
*TKR6160
(Option)
*TKR6050
*TKR6051
*TKR6052
*TKR6053
*TKR6054
*TKR6063
*TKR6064
*TKR6065
(Option)
Bag N
Rear Shock Assembly
19
Stock shock position is inside
hole on the arm and 2nd from
inside hole on the tower
Stock rear ride height is 29mm
Shock length (droop) is 135mm
TKR1605
M3x10mm Set Screw
x2
Note: Make sure to tighten both cartridge cap
(TKR6015) and shock cap (TKR6003) to ensure
a proper seal. Tools may be required.