Tekno Point CNS-09, User And Installation Manual

Page: 41 / 112

37
Buttons on remote controller
+ and - button
Press "+" or "-" button once to increase or decrease 1°C of set temperature. Holding "+" or
"-" button, set temperature on remote controller will change quickly. On releasing button after
setting is finished, temperature indicator on indoor unit will change accordingly. (Temperature
can’t be adjusted under auto mode)
● When setting TIMER ON, TIMER OFF or CLOCK, press "+" or "-" button to adjust time
(Refer to CLOCK, TIMER ON, TIMER OFF buttons).
TURBO button
Press this button to turn on or turn off the TURBO function in cool,heat,fan mode.
Note:
● Press "QUIET" or "FAN" button the unit will quit this function.
● This function is no use in auto mode or dry mode.
HEALTH button
Press this button to turn on or turn off the health function.
SLEEP button
Press this button to turn on or turn off the SLEEP function under cool,heat ,dry mode.
Note:
● This function is off as defaulted after power on.
● It will be cleared after changing mode.
● It is no use under "FAN" mode and "AUTO" mode.
● When selecting " " with remote controller, it’s auto swing. left&right swing louver of air
conditioner will swing left&right automatically at the maximum angle.
● When selecting " , , , , , " with remote controller,it's the fixed position
swing. Left&right swing louver of air conditioner will stop at that position as shown by the
icon to swing.
● When selecting " ", it’s the circulating swing. Left&right swing louver of air conditioner
will swing circularly according to the angle as shown by the icon.
Note:
There is no this function for the units. If press this button, the main unit will sound, but it also
runs under original status.
No display
● In static swing condition, pressing this button, the swing angle of left&right swing louver
changes as below: