TEKNIX TEK09245W, Installation And Operating Instructions Manual, Page: 17 / 25

17
3.5. Program Selection Table
N.B. The dishwasher does not have a separate drying programme.
Drying is by residual heat only.
3.6. Selecting a Program & Starting the Cycle
Please read in conjunction with Section 3.2. The Control Panel
 Ensure that the power supply to the appliance is ON.

Ensure that the door is closed securely.
 Load the baskets, ensuring that large deposits of food are removed.

Add detergent and then Press the On/Off Button (1)
 Press the Program Selection Button (2) until the required program
indicator light (5) is lit. (See Program Selection Table 3.5.)
 Press the delay function button (7) if required.

Close the door and the cycle will automatically start after 10 seconds.
 At the end of the cycle a buzzer will sound for approximately 8
seconds. Press the On/Off button to turn off the machine.
Opening the
door slightly, 10 to 15 minutes after the end of the cycle, to allow
excess steam to escape, may aid drying. However water will collect in
some items where there are indents or dimples. This is normal.
 Turn off the power supply to the machine and leave the machine to
cool down for a few minutes before unloading.
 Open the door carefully – steam may escape – this is normal.

Handle and remove items carefully as they may be hot.
 Always empty the lower basket first. This will avoid water dripping
from the upper baskets onto the lower basket.
= Rinse Aid Required