1 0
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
III. Preparations for use
Installation location:
1. Ventilation condition
When installing your refrigerator, ensure it is in a well ventilated location. Do not install
the refrigerator near any heat source such as a cooker. Avoid locating the refrigerator in
direct sunlight, this will ensure you reduce the energy consumption of the appliance. Do
not locate the refrigerator in a damp place, this will prevent the refrigerator from rusting
and leaking electricity.
The result of the total space of the room in which the refrigerator is installed being divided
by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M3.
Note: The amount of refrigerant charged for the refrigerator can be found on the
nameplate.
2. Heat dissipation space
When your refrigeration is installed and running, it will give off heat to it’s surroundings.
Therefore, a minimum of 300mm free space should be at the top of the unit, minimum of
100mm on both sides, and a minimum of 50mm at the back of the refrigerator.
Dimensions in mm:
W
D
H
A
B
C(°)
E
F
474
495
1
4
40
792
923
1
35
±5
50
100
Note: Figure 1, Figure 2 only illustrate the space demand of the product.