Section:
Description:
Page No:
Date:
DRILL HOLES
ASSEMBLE BASE
ASSEMBLE STANCHION
COM_210a
2 of 7
Sep 2021
Descriptions
ERGONOMICS AND ACCESSORIES
STEP 2: Insert plastic Through Clamp Cover Plate into Base Through Clamp.
STEP 1: Pre-drill a
1
2
"(12.7mm) diameter hole on Worksurface as per specification drawings.
(See Application Guide for Guidelines.)
NOTE: Make sure the distance from the back edge of the Worksurface to the center of the
drilled hole is minimum of 3".
STEP 3: Place Stanchion onto die cast Stanchion Base making sure bolts on the Base insert into
holes on the bottom of Stanchion. Align properly and secure in place by inserting Washer and
Bolt from bottom of Worksurface.
C1
G
C4
C3
C2
WORKSURFACE
WORKSURFACE
3" min.
L
C
Underside View
H
C3
C4
Dual Arm Stanchion Installation
(OPTIONAL)
