Teknion YEUSB Installation Manual Download Page 3

Page: 3 / 5

STEP 4: Screw down the Bracket onto the Worksurface as shown above.

STEP 3: Position the Bracket onto the Worksurface with the Power Supply (part D) beneath it
as shown above.

Section:
Description:

Page No:

Date:

INSTALLING THE POWER SUPPLY

COM_509

3 of 5

Jan 2018

USER EDGE USB INSTALLATION

ELECTRICAL

complements

Installation Guides

pilot holes

Note: The Bracket can be used to manage
the Power Supply Cables as shown above.

Note: Install the Worksurface after routing
the Jumper Cables through the table frame.

Summary of Contents for YEUSB

Page 2: ... dangling cables STEP 1 Before installing the Worksurface onto the Table s leg frame route the Jumper Cable through the Table s frame as shown above Section Description Page No Date ROUTING THE JUMPER CABLES ROUTING THE JUMPER CABLES COM_509 2 of 5 Jan 2018 USER EDGE USB INSTALLATION ELECTRICAL complements Installation Guides D D D D ...

Page 3: ...ection Description Page No Date INSTALLING THE POWER SUPPLY INSTALLING THE POWER SUPPLY COM_509 3 of 5 Jan 2018 USER EDGE USB INSTALLATION ELECTRICAL complements Installation Guides C D G D B D G H pilot holes Note The Bracket can be used to manage the Power Supply Cables as shown above Note Install the Worksurface after routing the Jumper Cables through the table frame ...

Page 4: ...own above through the pilot holes allocated on the sides of the Worksurface as shown above Section Description Page No Date INSTALLING THE USB MODULE CONNECTING THE JUMPER CABLES COM_509 4 of 5 Jan 2018 USER EDGE USB INSTALLATION ELECTRICAL complements Installation Guides A F A F D G A D E E pilot holes D ...

Page 5: ...R CODE Jan 2018 5 of 5 COM_509 USER EDGE USB INSTALLATION ELECTRICAL complements Installation Guides STEP 7 Connect the Power Cord to the USB Module as shown above Carefully turn the Table right side up and connect the Power Cord to the power source C C ...