Warning
Tipping or collapsing can result in serious injury. To prevent product failure and possible injury:
• Savera has been designed and tested for users weighing up to 275 lbs
• Savera XL has been designed and tested for users weighing up to 400 lbs
• Frequently inspect the chair for visible cracks and damages, tighten all screws, bolts, adjustable knobs and parts
• Do not use the chair if damaged or unstable – immediately remove it from service
• This chair is equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling
and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection
• Do not stand on or use the chair as a step ladder
• Failure to follow these warnings could result in serious injury
4D ARM PIVOT ADJUSTMENT
4D ARM SLIDER ADJUSTMENT
STOOL SEAT HEIGHT
STOOL FOOT RING HEIGHT
To raise or lower the stool’s foot
ring, turn the foot ring’s knob
counter clockwise to release the foot
ring and adjust the ring until you
reach the desired level. Turn the
knob clockwise to lock in place.
To raise the chair, lift the paddle up
while lifting your weight from the
seat until you reach the desired level
and then release to lock in place. To
lower the chair, lift the paddle up
allowing your weight to push the
seat down to the desired level and
then release to lock in place.
To adjust the arm cap depth
position, grasp the arm cap and
firmly slide forward or backward to
the desired position.
To pivot the armrest, grasp the arm
cap, rotate inward or outward and
release at the desired position. Not
available on Savera XL.
savera adjustment features & instructions