Warning
Tipping or collapsing can result in serious injury. To prevent product failure and possible injury:
• This chair has been designed and tested for users weighing up to 300 lbs
• Frequently inspect the chair for visible cracks and damages, tighten all screws, bolts, adjustable knobs and parts
• Do not use the chair if damaged or unstable – immediately remove it from service
• This chair is equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling
and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection
• Do not stand on or use the chair as a step ladder
• Failure to follow these warnings could result in serious injury
LUMBAR HEIGHT-ADJUSTMENT
ARM WIDTH ADJUSTMENT
STOOL FOOT RING HEIGHT
The lumbar height-adjustment
knobs can be found on the back
where the Inner Frame connects to
the Lumbar Element.
The height of the lumbar support
can be adjusted by sliding them up
and down.
To adjust the width of each arm,
turn the dial clockwise to release
the arm lock. Slide the arm inward
or outward to the desired position.
Tighten the knob to lock the arm
in place.
To raise or lower the stool’s foot
ring, turn the foot ring’s knob
counter clockwise to release the foot
ring and adjust the ring until you
reach the desired level. Turn the
knob clockwise to lock in place.
projek adjustment features & instruction
