10.2022 DIGITAL LOCKS & KEYS
6
4
2
1
3
1
1a
1b
2
2a
2b
To replace the Manager Key:
Collect all remaining and replacement Manager Keys.
Go to any lock operated by the lost/stolen Manager Keys.
Press . . The LED will flash.
4
2
1
3
1
1a
1b
2
2a
2b
To replace the Programming Key:
Note the order or serial number (found on the lock’s rear).
Contact Digilock Support to purchase a replacement Programming Key.
While the LED is flashing, insert the Programming Key. A two-tone beep will be
heard. Insert the Programming Key again. Three sets of two-tone beeps will be
heard, and the LED will turn off. All previously programmed Manager Keys will
be erased. Follow instructions to
to program the remaining
and replacement Manager Keys to the locks.
programming instructions
replace keys
The locks must be reprogrammed to prevent the lost/stolen keys from operating a lock.
set lock functionality
Each lock can be set for either shared or assigned use functionality. Press to check functionality. If in shared use, LED
is red. If in assigned use, LED is green.
1a
1b
1
2
2
1
1
2
2
To replace the Programming Key:
To set for shared use:
Insert the Programming Key. A
two-tone beep will be heard, and
the green LED will flash once.
Insert the Programming Key. A
two-tone beep will be heard, and
the red LED will flash once.
Press .
The red LED will turn on.
Press .
The red LED will turn on.
