Teknion Navigate Assembly Instructions Manual Download Page 259

Page: 259 / 277

Section:

Date: Sept 2019

ELECTRICS

height-adjustable bench

Installation Guides

Page: 10 of 10

HABN_

322b

WARNING:Don't connect to power

source untill installation is copmlete.

All wire connections must be

performed by a licensed electrician in

accordance with applicable codes and

regulations. Not following these

instruction could result in damge and

/or injury.

2.6

2.10

2.12

2.11

ATTACH CEILING PLATE & DRILL HOLES

STEP 10: Attach Ceiling Plates to Power Pole under the Ceiling. Drill holes for T-nuts using

Ceiling Plates as a template to determine location.

STEP 11: Push T-nuts inside holes from the Top of the ceiling tile. Wrap cover plates around

the Power Pole and fasten using hardware provided.

SECURE PLATES

Summary of Contents for Navigate






















































































































































































































































































Search results

Summary of Contents for Navigate

Reviews:

Teknion Navigate, Assembly Instructions Manual, Page: 259 / 277

Search results

Summary of Contents for Navigate

Reviews: