Section:
Description:
Page No:
Date:
CONNECT END GABLES AND TRANSVERSE BEAM
SECURE WITH FASTENERS
INT_009
4 of 12
Aug 2017
COMPLETE FRAME AND WIRE GAP WORKSURFACE - SINGLE SIDED
FRAMES, SUPPORTS AND WORKSURFACES
interpret
Installation Guides
STEP 4 : Fasten together using Socket Cap Screw and Nuts.
Level
and
square
the whole
assembly.
STEP 3: Bring End Gables and Central Transverse Beam Assembly together. Line up the
middle set of holes on the End Gable Cross Beams with Clamp Brackets holes.
Position End Gables
with holes facing inward.
C2
C3
A1
End Gable Connection
