Section:
Description:
Page No:
Date:
CLAMPS AND PUCKS INSTALLATION
DETAIL
MIDDLE CONNECTION DETAIL
INT_007b
2 of 10
Jun 2017
HEIGHT ADJUSTABLE CANTILEVER, PUCKS AND BOLT KIT - SINGLE SIDED FRAME
FRAMES, SUPPORTS AND WORKSURFACES
interpret
Installation Guides
STEP 1: Attach Clamp Brackets and Height Adjustable Pucks LOOSELY to the Beam. Make
sure positioning of Clamps is applicable to the connection specified.
A
A
NOTE: Don't tighten screws!
Beams and Clamps are part of Single
Sided Frame.
Refer to Installation Guide INT_009
for Complete Frame or INT_010 for
Beginning, Middle and Finish
Frame.
End Connection shown.
Beam
Clamp Bracket
B3
NOTE: Up to 3 Stacker Blocks can be placed on Beam.
NOTE: Up to 3 Pucks
can be used.
A
Clamp Bracket
A
Don't tighten screws!
