STEP 5: Install Wire Clamp and Cable Clamp as suggested locations. Suggested Locations are shown above.
Section:
Description:
Page No:
Date:
WIRE MANAGEMENT
Aug 2017
6 of 6
COM_113
ADJUSTABLE WORKSTATION TABLE - STANDARD & EXTENDED RANGE
HEIGHT ADJUSTABLE TABLES (LIVELLO)
C1 - Cable Clamp
B4 - 3/16" Wire Clamp
NOTE: Place Wire Management
as shown as diagram
NOTE: Underside View of Left
Hand Side shown as an example
Right Hand Side
Left Hand Side
B4
C1
C2
Installation Guides
complements
To Initiate Table:
1. Adjust Table to the lowest
position.
2. Hold the DOWN ARROW
switch for 5 seconds until the table
adjusts and references itself.
* ENSURE TABLE MOTION IS
FREE AND UNOBSTRUCTED
IN BOTH UP AND DOWN
DIRECTIONS AND SURFACE
IS LEVEL.
C2
