Teknim TFD-3230 Installation & Operating Manual Download Page 2

Mounting and Connection 

1.

 

Remove the head of the detector by pulling it upwards (2) by turning it (1) up to the short line in the 

direction of the counterclockwise direction as seen from the base. 

2.

 

Mount the base using the 2 mounting locations shown.  

 

 

 

 

 

3.

 

Make the cable connection according to the following diagram. Make a connection with pole 4 + pole and 
pole 1 - by taking pole + number 3 from pole 3 of the next detector. 

4.

 

Use the 3 (+) and 2 (-) connections for the remote indicator. 

5.

 

Replace the detector head. Make sure the line on the head matches the long line on the base  

6.

 

Give the detector power from alarm panel. In the absence of an alarm, the LED on the detector indicates 
that it is operating with a blue color for approximately 20 seconds. (the first 15 seconds a blue LED lights 

up in the detector for 5 seconds). 

 

 

 

 

 

 

Test 

Smoke Test: 

For the smoke test, allow the smoke to enter the smoke detection chamber for at least 1 minute with a 
flammable material or a test aerosol. When enough amount of smoke enters the chamber, the LED 

illuminates and reports the alarm. 
1.

 

Remove the smoke source when the alarm condition is reached.  

2.

 

Check that the red LEDs are lit continuously. Reset the detector on the panel. 

3.

 

If the detector does not give an alarm within 1 minute, the detector should go to service. 

4.

 

The system can be activated after the test has been performed. 
 

 
 

 

 

1922

 

Bilgi Elektronik San. ve Tic. A.Ş.

 

Dudullu OSB 1. Cad. İsmet Tarman İş Merkezi

 

No:1 Kat:2 No:32 Ümraniye / İstanbul

 

17 

1922-CPD-0874

 

EN 54-7:2000; EN 54-7:2000/A1:2002; EN 54-7:2000/A2:2006 
Point type smoke detector (Ionization) 
TFD-3230 
Technical data: see 

BİLGİ-TEC-170731-2

 

held by the manufacturer.

 

 

Manufacture 

 

 

 

 

 

*  2012/19/EU  (WEEE  directive):  Products  marked  with  this  symbol  cannot  be  disposed  of  as  unsorted 
municipal waste in the European Union. For proper recycling, return this product to your local supplier upon 

the  purchase  of  equivalent  new  equipment,  or  dispose  of  it  at  designated  collection  points.  For  more 
information see: www.recyclethis.info. 

 

Bilgi Elektronik San. ve Tic. A.Ş.

 

Dudullu Organize Sanayi Bölgesi 1. Cadde İsmet Tarman İş Merkezi

 

No:1 Kat:2 No:32 Ümraniye / İstanbul

 

/ Türkiye

 

 

Telephone:

 +90 216 455 88 46 

Fax: 

+90 216 455 99 06 

Sales: 

[email protected]

   

Technical Support: 

[email protected]

 

 

 

 

 

 

 

 

Reviews: