2.3 Hold 350-57 ADJUSTMENT PLATE in place and tighten 350-67 SCREW
M6x12 (Fig. 2с).
3.
350-50 GRIPPER FOOT adjustment.
Proper position of the 350-50 GRIPPER FOOT is roughly 0.004” (0.1mm) above 350-10
GRIPPER PAD. The gap should be enough to insert a piece of paper and remove it without
damaging the paper. (Fig. 3)
3.1. Move 350-11 TENSION HANDLE to a position shown on Fig. 4а.
3.2. Raise 350-02 HANDLE against the stop (Fig. 4а).
3.3. Hold 350-69 SET SCREW M5x30 with T-Key 2.5mm and loosen 350-68 NUT M5
(Fig. 4а).
3.4. Turn T-Key 2.5mm to adjust 350-50 GRIPPER FOOT position (Fig. 4b).
Clockwise rotation will raise the gripper foot.
Counter-clockwise rotation will lower the gripper foot.
