Teknik 5424256 Manual Download Page 24

WARNING

Please use your furniture correctly and safely. Improper use can cause safety hazards,

or damage to your furniture or household items. 

Carefully read the following chart.

Look out for:

What can happen:

How to avoid the problem:

• Overloaded shelves or drawers.

• Improper loading can cause the product

to be top-heavy.

• Risk of injury.

• Top-heavy furniture can tip over.

• Overloaded shelves and drawers can

break.

• Never exceed the weight limits shown in

the instructions.

• Work from bottom to top when loading

shelves and drawers. Place the heavier 

items on the lower shelves or in lower 

drawers.

• Improperly moving furniture that is not

designed and equipped with casters.

• Furniture can tip over or break if

improperly moved.

• Physical injury. Furniture can be very

heavy.

• Breakage of tops - particularly with

double pedestal furniture (drawers at both 

ends).

• Unload shelves and drawers from top to

bottom before moving the unit.

• Do not push furniture, especially on a

carpeted fl oor. Have a friend help you lift 

the item and set it in place.

• Provide support to the center section of

the top when lifting the furniture.

• Placing TVs on furniture items that are

not designed to support a television is 

hazardous.

• Risk of injury or death. TVs can be very

heavy. Plus the weight and location of the 

picture tube tends to make TVs unbalanced 

and prone to tipping forward.

• This product is not designed to support a

television.

Summary of Contents for 5424256

























Reviews: