manualshive.com logo in svg

Teknik 5401562, Instruction Booklet, Page: 16 / 21

Share
Download
Teknik 5401562 Instruction Booklet Download Page 16

Step 12

 

å

Fasten the DRAWER BACK (D78) to the DRAWER SIDES (D28 and D29). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).

 

å

NOTE: Be sure the DRAWER BOTTOM (D707) inserts into the groove of the DRAWER BACK (D78).

 

å

Repeat this step for the remaining drawer.

1

2

3

 

å

Insert the DRAWER SIDES (D28 and D29) at an angle
into the slot at each end of the DRAWER FRONT (L).

 

å

Slide the DRAWER BOTTOM (D707) into the grooves in the
DRAWER SIDES (D28 and D29) and DRAWER FRONT (L). 

The tabs should insert freely 
into the slots.  Gently tilt the 
DRAWER SIDES side to side 
until the tabs slip into the slots.

Groove

Start each screw a few turns before 

completely tightening any of them.

BLACK 1-9/16" FLAT HEAD SCREW

(8 used in this step)

30S

Be sure the DRAWER 
BOTTOM inserts into the 
DRAWER FRONT groove.

D28

D28

D28

L

L

Unfi

 nished 

sur

face

With the palm of your 
hand, tap the DRAWER 
BOTTOM down into 
the groove. 

Be sure the 
DRAWER 
BOTTOM 
inserts into 
the DRAWER 
BACK groove.

D29

D29

D29

D78

D707

D707

Page 16

Summary of Contents for 5401562






















Reviews:

No comments