8
VIII.
Firmly press and release
once. DISC LVL will be activated. Press
until the words IRON, FOIL, NICKEL, P-TAB, S-CAP and ZINC all
disappear.
IX. Wave the Nickel over the searchcoil.
a. The nickel will not be detected.
X. Firmly press and release
two times. NOTCH will be activated.
Press
twice.
The word “NICKEL” will start flashing. Wait until the flashing stops.
“NICKEL” will be illuminated.
XI. Wave the Nickel over the Searchcoil.
a. The nickel is now again detected.
b. The nickel has been “notched in.”
XII.
Rotating the THRESH knob clockwise places the detector in All Metal
Mode. Keep rotating the knob clockwise until you hear a faint hum. Pass
the quarter over the searchcoil. Vary the distance from the searchcoil on
each pass. Notice the changing pitch and volume.
XIII. Press-and-hold
a. Notice motion is not required. A motionless object induces a sound.
b. Notice the single audio tone. PINPOINT produces only this single
tone, regardless of the type of metal detected.
c. Vary the distance of the quarter to the searchcoil and notice the
changing depth-display values. The 2-digit reading indicates depth
distance in inches from the searchcoil.
XIV. Return To Factory Default
To reset the detector to the original factory default settings:
a. Turn off detector
b. Press and hold
and then turn detector on.
c. Release
QUICK-START DEMONSTRATION
(continued)
