5
ASSEMBLY
IN THE FIELD TECHNIQUES
(continued)
Adjusting the Arm Rest
The arm rest may be moved
forward or backwards by removing
the single screw and nut, and then
repositioning the 2-piece arm rest.
Users with shorter arms may find
the arm rest more comfortable in
the forward position. In order to
move the arm rest backwards, the
plastic plug must be removed from
the aluminum tube.
Arm Rest Strap (not included)
Some users prefer to use a strap
when swinging the detector
vigorously, in order to hold the
detector secure against the arm.
The strap may be purchased as an
optional accessory.
The detector can also be used
without the strap with no
compromise to detector balance
and stability under most
conditions.
Hand-grip
Nut
Screw
1/8” Headphone Jack
1/4” Headphone Jack
Search
Coil
Cable
Cable
Plug
Search Coil
S-Rod
armrest
Velcro
Strap
Lower
Stem
Upper
Stem
Velcro
Strap
Knurled
Knob
Locking
Collar
Battery
Compartment
(back side)
Locking
Collar
Optional Arm Strap
Swing the search coil slowly,
overlapping each sweep as you
move forward. It is important to
sweep the coil at a consistent
speed over the ground as you
search. After identifying a target,
your sweep technique can help in
identifying both the location and
the nature of the target. If you
encounter a weak signal, try
moving the coil in short, rapid
sweeps over the target
zone; such a short rapid
sweep may provide a
more consistent
target identification.
Most worthwhile
objects will
respond with
a repeatable
tone. If the
signal
does
not repeat after sweeping the coil
directly over the suspected target
a few times, it is more than likely
trash metal.
Crossing the target zone with
multiple intersecting sweeps at
multiple angles is another way to
verify the repeatability of the
signal, and the potential of the
buried target. To use this method,
walk around the target area in a
circle, sweeping the coil across
the target repeatedly, every 30 to
40 degrees of the circle, about ten
different angles as you walk
completely around the target. If a
high-tone target completely
disappears from detection at a
given angle, chances are that you
are detecting oxidized ferrous
metals, rather than a silver or
copper object. If the tone
changes at different angles, you
may have encountered multiple
objects. If you are new to the
WHAT
READS
LIKE THIS
…MAY
ACTUALLY
BE THIS
16
