118-0817-007 22
4.
Remove
Circlip 1
from the
Spindle
.
5.
Knockout tool requirements:
The knockout tool can be any
round shaft less between 14mm &
24mm (9/16" & 1").
An ideal knock out tool can be
turned to dimensions in drawing to
right.
6.
Using the knock out tool and a
small mallet or hammer, tap out
the spindle from
Spindle end A
until
Spindle end A
is
approximately 15
– 20mm (3/4”)
from the inside of
Bearing 1
.
