manualshive.com logo in svg

TEKNA 702736, Technical Bulletin, Page: 2 / 16

Share
Download
TEKNA 702736 Technical Bulletin Download Page 2

TB-1016-A

2

Table of Contents

Topic  

 

Page

EC Declaration of Conformity

 .................................................................................................................................

3

Operational Description

 ............................................................................................................................................

3

Construction Features, Materials of Construction, 

 ....................................................................................

4 

Specifications & Technical Data
Safety Precautions

 .......................................................................................................................................................

5

Installation, Operation, Preventive Maintenance & Cleaning, 

 .............................................................

6 

Spray Gun Lubrication
Parts Replacement/Maintenance

 ..............................................................................................................

7–12

 

A.  Servicing Air Valve

 ....................................................................................................................................

7

 

B.  Replacing Air Valve

 ...................................................................................................................................

8

 

C.  Needle Packing, Fluid Insert, Spreader Valve Assembly

 ......................................................

9

 

D.  Air Separator Seal

 .................................................................................................................................

10

 

E.  Chart 1 – Air Caps

 .................................................................................................................................

11 

 

 

Chart 2 – Fluid Nozzles & Fluid Needles

 

F.  Exploded View and Parts List

 ..........................................................................................................

12

Troubleshooting Possible Problems in Operation

 ............................................................................

13–14

Accessories

 ...................................................................................................................................................................

14

Warranty 

.........................................................................................................................................................................

15

NOTE:

When used with the HVLP cap, this gun can be used any-

where—both in mandated HVLP and unregulated areas.

When used with the High Efficiency cap, this gun can be 

used in unregulated areas and certain approved regulated 

areas. See 

www.autorefinishdevilbiss.com

 for a complete 

listing of approved areas and requirements for regulatory 

compliance. 

Consult your local air quality management agency with any 

questions regarding HVLP or compliance requirements in 

your area.

Summary of Contents for 702736

















Reviews:

No comments