B
C
11a.
11)
12.)
13.)
MULTIPLE ITEM TRIGGER SET-UP
FOR USE WITH ELECTRIC BOX
1.) Hang ELECTRIC BOX in desired location.
2.) Locate MIT CABLE and insert cable into the MIT jack located on
Electrified Maniac’s MODULE and MIT jack on ELECTRIC BOX.
3.) Switch Electrified Maniac to Footpad / MIT mode to trigger
Electrified Maniac using ELECTRIC BOX. Turn item off when not
in use.
4.) Turn switch on ELECTRIC BOX to ON position.
5.) Press the button on top of the ELECTRIC BOX to activate
ELECTRIC BOX and automatically activate Electrified Maniac.
Surface Washable Only.
ALL NEW MATERIALS :
Metal, Wood, Plastic, Polyester,
Polyester Fiber, Foam
Electrified Maniac:
Requires 4 ‘AA’ Batteries (Not included)
or 6V 2A DC adapter (included)
ELECTRIFIED MANIAC is a trademark
of Tekky Toys. Copyright © 2014 Tekky Toys.
All Rights Reserved. MADE IN CHINA
Electric Box:
Requires 3 ‘AA’ Batteries (Not included)
ELECTRIC BOX is a trademark
of Tekky Toys. Copyright © 2014 Tekky Toys.
All Rights Reserved. MADE IN CHINA
visit us at tekkytoys.com
ON
OFF
FOOTP
AD
MIT
FOOTP
AD
VOLUME
CON
TROL
B
A
T
TER
Y
MIT
DC 6
V. 2A
MIT
JACK
MIT
JACK
ELECTRIC BOX
MODULE
Optional Footpad Setup
Follow steps #1 through #11 on initial installation first.
1. Connect the cable from the optional footpad to the
jack labeled FOOTPAD located on the module.
2. Turn the switch on the module to the ‘FOOTPAD”
position to enable FOOTPAD activation.
3. Step on FOOTPAD to activate the scary sequence.
(go to instruction #12 to continue setup)
MIT
ON
OFF
FOOTPAD
MIT
FOOTPAD
MODULE
VOLUME CONTROL
BATTERY
MIT
DC 6V. 2A
www.tekkytoys.com
*Footpads are sold separately and can be purchased at
WARNING
DO NOT TURN ITEM ON UNTIL YOU HAVE COMPLETELY FINISHED ASSEMBLY.
STAY CLEAR OF ITEM WHILE OPERATING.
DO NOT PLACE ITEM ON UNEVEN GROUND.
11.
FOOTPAD
MIT
MIT
WARNING
DO NOT TURN ITEM ON UNTIL YOU HAVE COMPLETELY FINISHED ASSEMBLY.
STAY CLEAR OF ITEM WHILE OPERATING.
DO NOT PLACE ITEM ON UNEVEN GROUND.
DO NOT PLACE WEIGHT ON ITEM WHILE IN OPERATION
Tekky Toys Hours of Operation: Monday - Friday 9am to 5pm CST
T: 708-478-8424 E: [email protected]
visit us: tekkytoys.com
Adjust sound with VOLUME CONTROL KNOB located on the MODULE
as needed.
Connect 6V 2A ADAPTER (included) or insert 4 AA alkaline batteries
(not included) into the battery compartment. (See illustration 11a)
Note: Turn the switch to the ON position to operate in Sound or Motion
activation mode. Make a loud sound (clap), or move in front of the item to
activate. Turn the switch to MOTION to operate in Motion activation only.
Turn item OFF when not in use.
Pull the shirt down and adjust arms for “un”life-like appearance.