Use the built-in charging cable to charge.
Do not expose the grip ring to high humidity or extremely high or low temperature for a long time.
Maintenance of the smartwatch
Do not scratch the sensor, protect it from damage.
Clean the display surface with a damp cloth and use mild soap, water to remove oil or dust.
Do not expose the smartwatch to the environment with strong chemicals, such as gasoline, cleaning solvents,
propanol, alcohol or insect repellent. Chemicals will damage the sealing ability of the smartwatch and the case
surface.
Avoid subjecting the smartwatch to strong impacts and extreme exposure to high temperatures.
When the lens and casing are intact, it is resistant to water splashes. Violent disassembly will affect the
waterproofness.
Common problem
- Can't find the Smartwatch?
Answer: Because the Bluetooth radio of the Smartwatch is not searched by the mobile phone, please make sure
that the Smartwatch is turned on and activated, and is not connected to other mobile phones. Move the
Smartwatch closer to the mobile phone and search again. If it is still not valid, turn off the Bluetooth on the
mobile phone for 20 seconds and then restart the Bluetooth and search again.
- Should the Bluetooth connection always be active and will there be data if it is closed?
Answer: Before syncing the date, exercise and sleep date will be kept in the wristband host. When the mobile
phone and Bluetooth of the smartwatch are successfully connected, the smartwatch will automatically upload
data to the mobile phone, but the data stored by the smartwatch is limited, and only one week of Bluetooth
data can be stored. When the space is full, the oldest data will be automatically overwritten to generate the
newest data, so please sync the smartwatch with your phone in time.
Remarks: If you turn on the incoming call and SMS reminder function, you need to keep Bluetooth connected,
the alarm will work with bluetooth disconnected.
- What should I do if the smartwatch cannot be charged?
1. Please confirm if the direction of the charging cradle is correct and if the charging clip is in good contact with
the smartwatch.
2. When the power of the smartwatch is lower than 3.6V, there will be a period of precharging the battery.
Remarks: After plugging in the charger, it will immediately enter the charging state. If there is no display, it will
take 3 to 5 minutes to enter the charging state.
3. Can wearing the smartwatch for a long time harm the human body? Answer: The radiation from the device is
well below the US FCC standard and is basically negligible. Long-term use will not cause radiation damage to the
human body.
