User manual Smartwatch AD0095 - AK-T500 Plus
Platform requirements:
Android 4.2 and above.
IOS 9.0 and above.
Bluetooth BT4.0
APP download method:
DOS / Android mobile phone users: scan the QR code to download and install the app:
Android: Search for "M2 Wear" through the software app shop to download and
install the app.
Apple: Search for "M2 Wear" through the app shop to download and install the app
When using for the first time:
To ensure normal use of the smartwatch, charge it first.
The contact point of the charging clip connected to the power supply is aligned with the contact point on the
back of the smartwatch to charge it. Note: Reversed contact point will short-circuit the battery.
Connecting the Smartwatch and the APP:
All permissions in the APP installation process must be accepted. Smartwatch and mobile phone must be
connected with Bluetooth 3.0 and 4.0 to achieve all functions.
Bluetooth 4.0 connection method: open the APP and Bluetooth with the mobile phone, the APP remembers to
enable the notification point to confirm. Click Add device, search for the device name and connect. Android
phones need to turn on GPS to find the Bluetooth name of the smartwatch. It is important that GPS access is
always allowed, not just over Wi-Fi.
Bluetooth 3.0 connection: Apple: Insert the Bluetooth mobile phone when Bluetooth 4.0 is connected, search
for the Hry Bluetooth 3.0 device and click connect to pair. Android: When Bluetooth 4.0 Bluetooth is connected,
enter the Bluetooth of the mobile phone. When entering the Bluetooth function, it will automatically remember
the 3.0 pairing. If there is no reminder, search for Bluetooth device connection with 3.0.
Simple solution to common Bluetooth problems: Because the Bluetooth protocols of various brands of mobile
phones are not uniform, sometimes the connection between the mobile phone and the Bluetooth of the
Smartwatch is unstable, you can turn off the Bluetooth of the mobile phone and reconnect it. Problems resulting
from the instability of the Bluetooth connection of your mobile phone are not covered by the warranty of the
watch.
If the smartwatch, when receiving calls or notifications, does not have a notification reminder, it is necessary to
set the notification settings of the mobile phone, open the corresponding application and open the notification
application to receive the notification information.
Instructions for operating the smartwatch:
- Power key: short press to wake up / turn off the screen display time, long press can be used to turn on and off.
- Clock interface: slide the clock interface to the left or right to enter the system menu.
- Clock in menu: battery info, ringer/mute, find my device, torch, SIRI voice, Bluetooth.
- Clock switch: long press the clock interface screen, the clock selection will appear, slide left and right to select
the desired clock and press to confirm the setting.
