9
USER GUIDE
Optional Feature
Charging a Mobile Phone
(Additional Hardware Required)
You can use the USB port on myPower for iPod to charge your mobile phone, or any other device that requires
up to 5V. To do this, you will need the optional myPower for iPod USB charging cable and the appropriate
adapter plug for your mobile phone or other device. You can obtain the optional USB charging cable and
adapter plugs from Tekkeon at
www.tekkeon.com/mpadapters
or at 888-787-5888 or 1-714-832-1266.
To charge your mobile phone, or other 5V device:
1. Connect the optional USB charging cable into the USB port on myPower for iPod.
2. Connect the opposite end of the cable to the optional adapter plug that fits your mobile phone or device.
3. Connect the adapter plug into the power jack on your mobile phone or other device that requires up to 5V.
4. Switch the myPower for iPod power switch to On (if it is off).
5. To stop charging, unplug the USB charging cable, and switch the power switch to Off if you are not
powering iPod.
NOTE:
As myPower for iPod charges your device battery, the battery capacity in myPower for iPod will decrease
and each light on myPower for iPod will begin to turn off in sequence from right to left. When myPower for
iPod is completely out of battery, the red light will turn off. At this point, you must charge myPower for iPod.
mp_UG_RevC_r1 4/3/06 11:18 AM Page 9
