Teka TKD 1481 User Manual Download Page 35

34

MAINTENANCE

      Technical Specifications

MAX.Current

Standard Water Pressure

10A

0.05MPa~1MPa

Power Supply

220-240V~,50Hz

H

W

D

Customer service

In case of questions please contact our customer service at:

Risk of electric shock

 

Never try repair an appliance which is defective of presumed to be defective.

   You may put your own and future users' lives in danger.Only authorised specialists are 
   allowed to carry out this repair work.

 

Improper repair will void the warranty and subsequent damages can't be recognized!

Warning!

Spare part for your appliance are available for a minimum of 10 years.

     Transport

IMPORTANT STEPS WHEN MOVING THE APPLIANCE

• 
• Check, if the door and the detergent dispenser are closed properly.
• Remove the water inlet pipe and the outlet hose from the house installations.
• Let the water drain completely from the appliance (see “Maintenance Cleaning the 
   drain pump filter”)
• Important: Re-install the 4 transport bolts in the back of the appliance.
• This appliance is heavy. Transport with care. Never hold any protruding part of the
   machine when lifting. The machine door cannot be used as a handle.

Unplug the appliance and close the water inlet tap.

TKD 1481
TKD 1491
TKD 1500

8

.

0kg

9

.

0kg

10.0kg

595

*

565

*

850

595*565*850
595*565*850

68kg
71kg
72kg

2000W
2000W
1950W

Summary of Contents for TKD 1481












































Reviews: